|
Commercial
Applications
Foam Insulators of
North Carolina offers
PolyMaster
Foam-In-Insulation for commercial applications throughout
the Southeastern United States.
Cavity
Fill
PolyMaster foam completely fills the cavity between double
walls, fascia walls or internal/external cosmetic walls, producing
excellent seals around fittings, conduit, fixtures and pipe
chases while still allowing the wall to weep as constructed.
PolyMaster
insulation can provide R-values comparable to a higher than
rigid board insulation without the potential problems of toxicity
or environmental damage, or the hassle of fitting board seams
together. PolyMaster insulation is acceptable for use under
the most stringent fire codes.
Block
Fill
PolyMaster
insulation can be used to insulate concrete block, either
by top fill or by side or "pressure fill." PolyMaster
insulation can be installed in 10' to 18' lifts during construction.
Six, eight, ten and twelve-inch block are easily filled in
both running or stacked configurations.
Pressure
fill applications require holes as small as 5/8" and
no larger than 2" drilled directly into the masonry.
Foam will flow and fill the cavity up to twelve feet in either
vertical direction from the hole. Pressure filling generates
a complete fill of the core and head joints as the application
progresses down the run of the block wall.
Sealing
Abandoned Storage Tanks and Mineshafts
PolyMaster
foam is a proven way to meet environmental compliance codes
for sealing and securing abandoned underground and aboveground
storage tanks. It has also been used to seal old mineshafts
and for other situations requiring an inert material to protect
the environment.
Since
environmental regulations vary, consult Federal, state and
local authorities before using to ensure compliance.
Commercial
Retrofit
Commercial
structures can be easily retrofitted with PolyMaster Foamed-In-Place
Insulation to improve thermal and/or acoustical properties.
The ease with which PolyMaster insulation can be installed
makes it a cost-effective choice, especially for complicated
buildings that would require extensive renovation with other
types of insulation. |
